A 2002 Dodge generates trouble codes and warning lights on the instrument panel. When these lights are illuminated, your vehicle may require servicing.
MB SD Connect Compact 4 Most mechanics or dealerships will reset the computer for you after the servicing or repair, but not all. If you have warning or service lights still turned on your dash, then you need to reset the computer yourself. It only takes a few moments of your time and requires no special tools.
MB SD Connect Compact 4 Digiprog III Renault CAN Clip MB SD Connect Compact 4 Digiprog III Renault CAN Clip MB SD Connect Compact 4 Digiprog III Renault CAN Clip MB SD Connect Compact 4 Digiprog III Renault CAN Clip
Locate the fuse panel cover under the steering column. Pull down on it from the top using your fingers.
Look for the Electronic Control Unit fuse (ECU) on the fuse diagram,
Digiprog III which can be found on the fuse panel cover. Also find the fuse pullers inside the panel.
MB SD Connect Compact 4 Digiprog III Renault CAN Clip MB SD Connect Compact 4 Digiprog III Renault CAN Clip MB SD Connect Compact 4 Digiprog III Renault CAN Clip MB SD Connect Compact 4 Digiprog III Renault CAN Clip
Use the fuse pullers to remove the Electronic Control Unit fuse.
Put the key into the ignition and turn the vehicle on, but don't start the engine.
Wait five minutes and then put the ECU fuse back in place.
Renault CAN Clip The warning and service lights will flash several times on the instrument panel and then turn off. The computer is now reset.
MB SD Connect Compact 4 Digiprog III Renault CAN Clip MB SD Connect Compact 4 Digiprog III Renault CAN Clip MB SD Connect Compact 4 Digiprog III Renault CAN Clip MB SD Connect Compact 4 Digiprog III Renault CAN Clip
Put the fuse pullers back in place, close up the fuse panel cover and turn off the vehicle.
References
"Dodge Caravan, Plymouth Voyager & Chrysler Town & Country: 1996 thru 2002 (Haynes Repair Manual);" Haynes; 2002